Chitongda YL-007M2 Bedienungsanleitung PDF herunterladen (Seite 18)

defense zone number [01~99], then choose [Home Arm], and then

choose whether alarm [0/1] button, and finally press [#] to confirm. The

main unit will make a long beep and a voice prompt “setting completed”.

Operating method: [61]  [XX]  [A]  [#]

XX indicates: [01~99] is defense zone 1 to defense zone 99

A indicates: [0] no alarm under home arm status even the sensor

is triggered

[1] alarm under home arm status

Example: set sensor in defense zone 10 make alarm under home arm

status

Operation:【61】【10】【1】【#】

After this setting, when you “home arm” the system, sensor in defense

zone 10 will work normally.

Example: set sensor in defense zone 55 not make alarm even when it’s

triggered under home arm status

Operation:【61】【55】【0】【#】

After this setting, when you “home arm” the system, sensor in defense

zone 55 will not work.

23. Voice Recording

In setup state, use keypad to input [701], and then press [#] to confirm.

The main unit will emit a beep and the [ ] indicator is on, and after

10 seconds countdown, recording starts: record at 30cm away from the

main unit with moderate tone; 10 seconds later, the main unit will make a

beep indicating the recording stops and the recorded voice will replay.

Operating method: [701]  [#]

LCD display:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Keine Kommentare

Chitongda YL-007M2 Bedienungsanleitung Seite 18